Velleman CAMIP13 Quick Installation Guide - Manual (Page 15)

11
3.3.3 Cruise
Note: Before using this function, make sure you have finished setting several preset points.
Here defines how the auto mode of the camera is going to work when is selected: Sequence or Auto Pan.
Auto Pan
When “Auto Pan” is selected here and is clicked on the DPTZ page, the camera will start panning in the 5x
zoom-in ratio.
Sequence
When “Sequence” is selected here and is clicked on the live view page, the camera will start patrolling each
preset point defined in “Sequence”.
Step1: Click “Add” to choose a preset point from the drop-down list, and select the duration to stay at this point
from 1 ~ 60 seconds.
Then, click “Save” to confirm.
Step2: Click “Add” again to add more preset points.
To modify the existing preset point setting, click “Edit”. To insert a preset point before the selected point,
click “Insert”. To remove the added preset point, click “Delete”.
Step3: When all the points are added, click “Save” to confirm.