Velleman IVSPROM2 Quick Installation Guide - Manual (Page 10)

IVSPROM2
V. 02 – 02/05/2012 10 ©Velleman nv
SYSTEM: click to set the system configurations.
TOOLS
LANGUAGE – ADMIN PASSWORD – OPERATOR PASSWORD – UPGRADE -
BACKUP CONFIG – RESTORE CONFIG
SYSTEM INFO
BAUD RATE – HOST ID – R.E.T.R. – AUTO KEY LOCK – CLEAR HDD – RESET
DEFAULT – REMOTE CONTROL ID – SERIAL TYPE – VIDEO FORMAT – VERSION
BACKUP DATA (USB)
BACKUP LOG (USB)
EVENT INFORMATION: click to enter the event search menu.
QUICK SEARCH
EVENT SEARCH
HDD INFO
EVENT LOG
ADVANCED CONFIG: click to set CAMERA, DETECTION, ALERT, NETWORK, DISPLAY, RECORD,
DEVICES, DCCS, IVS* & NOTIFY*.
CAMERA
BRIGHTNESS – CONTRAST – SATURATION – HUE - COV. – REC - CHANNEL
TITLE
DETECTION LS – SS – TS – MOTION – ALARM - AREA
ALERT
EXT. ALERT – INT. BUZZER – KEY BUZZER – VLOSS BUZZER – MOTION BUZZER
– ALARM BUZZER – HDD BUZZER – ALARM DURATION (SEC) – HDD NEARLY
FULL (GB)
NETWORK NETWORK – SNTP – FTP – E-MAIL
DISPLAY
DE-INTERLACE* – FULL SCREEN DURATION – QUAD SCREEN DURATION* –
CALL SCREEN DURATION – DISPLAY COVERT – HDD DISPLAY MODE – VIDEO
OUTPUT* – ALPHA BLENDING – VGA OUTPUT – VGA DEINTERLACE* –
COMPOSITE DEINTERLACE*
RECORD
MANUAL RECORD – EVENT RECORD – TIMER RECORD – PRE-ALARM RECORD –
OVERWRITE – EVENT RECORD ALL CH – KEEP DATA LIMIT (DAYS) – RECORD
CONFIG
DEVICES
DCCS
IVS*
CAMERA* – IVS MODE – DISPLAY LINE – SENSITIVITY – RESET COUNT –
VIRTUAL FENCE AREA – SCENE CHANGE – SCENE CHANGE SENSITIVITY
NOTIFY* GUARD
SCHEDULE SETTING: click to set record timer and detection timer.
RECORD
DETECTION
ALARM
7. Front and rear panels
7.1 Front Panel
• LED indicators
DVR is powered on.
HDD is reading or recording.
An alarm is triggered.
Timer recording is on.
Under playback status.
• : For models with a DVD writer, press to open or close it.
• CH1 ~ 4: Press the channel number buttons to select the channel to display.
• : Press to show the 4 channel display mode.
• SEQ: Press to display each channel in full screen one by one starting from CH1. When the last channel is
displayed, it will repeat from CH1 again. To exit this mode, press SEQ again.
• SLOW: In playback mode, press to show slow playback.