Velleman IVSPROM2 Quick Installation Guide User Manual
Page 11
IVSPROM2
V. 02 – 02/05/2012
11
©Velleman nv
•
ZOOM: Press to enlarge the picture of the selected channel (in FRAME or FIELD recording mode).
•
PLAY: Press to playback the latest recorded data.
•
LIST (Event List Search): Press to quickly search the recorded files by event lists: RECORD / MOTION /
ALARM / TIME / HUMAN DETECTION / IVS / STATISTIC, or select FULL to show all the event logs.
To quickly search the time you want, select QUICK SEARCH. For more details, refer to the full user manual.
•
MENU: Press MENU to enter the main menu.
•
ENTER: Press ENTER to confirm the setting.
•
: Press ▲ / ▼ / ◄ / ► to move up / down / left / right.
In playback mode:
Press to pause playback.
Press to stop playback.
Press to fast forward.
Press to fast rewind.
•
AUDIO (SLOW + ZOOM): Press SLOW + ZOOM to select live or playback audio from audio channel 1~4.
Live audio from audio channel 1~4
(indicated in white).
Playback audio from audio channel 1~4 (indicated
in yellow).
Audio channel unselected
•
P.T.Z. (
+ SEQ): Press
+ SEQ at the same time to enter or exit the PTZ control mode.
•
USB port: There are two USB ports on the front panel, one for connecting a USB mouse for mouse control,
and the other one for connecting an USB flash drive for video backup.
Note: Do not connect two USB mice or two USB flash drives simultaneously.
Note: For compatible USB flash drive list, please refer to APPENDIX 3 in the full user manual.
7.2
Rear Panel
•
VIDEO IN (1 ~ 4): Connect to the video connector of a camera.
Note: The DVR will automatically detect the video system of the camera; make sure that the cameras are
properly connected to the DVR and powered before the DVR is turned on.
•
AUDIO IN (1~4): Connect to the audio connector of a camera if the camera supports audio recording.
Note: To make a video backup with audio, make sure the camera which supports the audio function is
connected to the video-in channel and audio-in channel. For example, the audio data from audio CH1 will
be recorded with the video data from video CH1.
•
AUDIO OUT: Mono audio output to connect to a speaker.
•
MONITOR: Connect to a CRT monitor for video output.
Note: While connecting to a CRT monitor, it is also supported to connect to an LCD monitor simultaneously
for dual video output.
•
CALL: Connect to a monitor specific for sequence display.
•
VGA: Connect to an LCD monitor directly.
Note: While connecting to an LCD monitor, it is also supported to connect to a CRT monitor simultaneously
for dual video output.
•
IR: Connect an IR receiver extension line (not incl.) for remote control.
•
EXTERNAL I/O: This port is used to connect external devices (such as speed dome cameras or external
alarm, etc).
•
LAN: Connect to Internet by LAN cable.
•
DC 19V: Connect to the supplied adapter.
•
Power Switch: Switch to | to turn on the power, to | to turn off the power.