Velleman IVSPROM2 Quick Installation Guide - Manual (Page 9)

IVSPROM2
V. 02 – 02/05/2012 9 ©Velleman nv
6.2 Quick menu bar
Move to the mouse pointer to the left of the screen to extend the quick menu bar and show the six functions:
Quick Menu (extended)
Click to show the channel switch panel and select the preferred panel layout.
Click to display the playback the control panel, and click to play the latest recorded video clip, or
click to enter the search list.
Switch to the channel you want first, and click to enter the zoom-in mode. In this mode, click and
drag the red frame on the bottom left of the screen to move to the place you want to see. To exit this
mode, click 7.
Click to select the desired audio channel.
In live mode, only the live audio channels can be selected.
In playback mode, live and playback audio channels can be selected.
Click to enter the PTZ mode and show the PTZ camera control panel (when applicable).
Click to show the power off panel to either halt or reboot the system.
6.3 Main menu
Right-click anywhere on the screen to show the main menu as follows, and right-click again to exit.
Main Menu
Main menu structure
*: selected models only
QUICK START: click to set the status display, image settings, and date & time.
GENERAL
CHANNEL TITLE – EVENT STATUS – DATE DISPLAY – DCCS DISPLAY – MOUSE
SENSITIVITY – PRIORITY* – RECORD CONFIG
TIME SETUP DATE - TIME
DATE SETUP: click to set the date display and daylight saving.
DATE INFO
DISPLAY DATE OF MODE – FORMAT
DAYLIGHT DAYLIGHT SAVING