Velleman IVSPROM2 Quick Installation Guide - Manual (Page 5)

IVSPROM2
V. 02 – 02/05/2012 5 ©Velleman nv
• Familiarise yourself with the functions of the device before actually using it.
• All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to
the device is not covered by the warranty.
• Only use the device for its intended purpose. Using the device in an unauthorised way will void the
warranty.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the
dealer will not accept responsibility for any ensuing defects or problems.
• Keep this manual for future reference.
• DO NOT use this product to violate privacy laws or perform other illegal activities.
4. Features
The IVS DVR holds following features:
Flow counting
A virtual detection line can be set to detect the moving
direction of pedestrians for flow counting
Virtual fence / one-way pass
A virtual intruder detection line is set to detect
intruders coming from a specified direction
Power Mobile support
Eagle Eyes for Mobile Surveillance.
Mobile surveillance via the EagleEyes
software is supported on many popular
mobile platforms, e.g. iPhone, Android,
BlackBerry, Windows Mobile and Symbian.
Push notification on mobile device
When an event is detected by the human detection
camera, the IVS DVR will immediately send an instant
notification (Push notification) to a mobile device
(iPhone, iPad, Android phone…) within 5 seconds. Once
the notification is confirmed the mobile surveillance
software (EagleEyes) is automatically activated for
remote access.
DVR/Camera Communication System (DCCS) technology
With this system, control signals can be transferred directly via coaxial cable to control the
human detection camera. This highly simplifies the installation and reduces labour cost and
working hours.
IVS Human Detection camera
•
Built-in Infrared sensor alarm for human detection and sending push notifications to a mobile device
(iPhone, iPad, Android phone…)
• Supports DVR / Camera Communication System (DCCS) Technology
o
There is no need to additionally connect RS485 control wires for camera control because the control
signals can be transferred directly via coaxial cables.
o
Camera installation is highly simplified resulting in lower labour cost and working hours.
• IR LEDs built-in for 24-hour day & night surveillance
• Smart Light Control to dynamically adjust image performance for clear and accurate images.