Velleman IVSPROM2 Quick Installation Guide - Manual (Page 14)

IVSPROM2
V. 02 – 02/05/2012 14 ©Velleman nv
• When the operator password is entered, will be shown on the status bar of the screen, and the main
menu is NOT accessible. The operator user level needs to be set in the main menu SYSTEM > TOOLS.
• To switch between these two user levels, click the current user level icon to switch to the key lock mode,
and move your mouse to show the password input keypad, and enter the password of the user level you
want.
8.5 Video output switch
Showing the video output simultaneously on a CRT monitor (connected to MONITOR) and LCD monitor
(connected to VGA) is supported.
To set the video output:
1. When the DVR is powered on and initialized, right-click to show the main menu, and select
ADVANCED CONFIG > DISPLAY > VIDEO OUTPUT.
2. Select BOTH if you want to output images on both LCD and CRT monitors; select VGA if you want to
output images on an LCD monitor; select COMPOSITE if you want to output images on a CRT monitor.
ADVANCED CONFIG
CAMERA
DE-INTERLACE (For Selected Models Only) OFF
DETECTION FULL SCREEN DURATION 03
ALERT QUAD SCREEN DURATION (For Selected Models Only) 03
NETWORK CALL SCREEN DURATION 03
DISPLAY DISPLAY COVERT ON
RECORD HDD DISPLAY MODE HDD SIZE
DEVICES VIDEO OUTPUT (For Selected Models Only) BOTH
DCCS ALPHA BLENDING 200
IVS VGA OUTPUT 1024 X 768
NOTIFY VGA DEINTERLACE (For Selected Models Only) ON
COMPOSITE DEINTERLACE(For Selected Models Only) ON
EDIT
9. Set push notification
Note: only available on the human detection camera.
This IVS DVR series supports instant event notifications to your mobile device (iPhone, iPad, Android…) with our
self-developed program, EagleEyes, installed. When a human is detected by a human detection camera, the
DVR will immediately receive alarm signals and send them to your mobile device.
Note: EagleEyes is a powerful mobile surveillance program developed by AV TECH Corporation. For more
operations details about EagleEyes, visit http://www.eagleeyescctv.com.
For any comment or question about this program, contact Velleman. Visit www.velleman.eu for contact details.
You need to perform some settings on your mobile device for this function to work properly.
9.1 Prerequisite
Before setting this function, make sure you have checked the following:
1. You have a mobile device (iPhone, iPad, Android phone…) with our self-developed program, EagleEyes,
installed. For more details, see below under Program download.
2. A human detection camera is connected to your IVS DVR.
3. The event record function of your IVS DVR is enabled.
4. The motion detection function of your IVS DVR is enabled.
5. Your IVS DVR is connected to Internet. For details, refer to
http://www.surveillance-download.com/user/CMS.pdf.
6. Make sure the DVR is accessible over the Internet via a remote PC (not on the same network as the DVR).
9.2 Configuring the mobile device
Program download
1. Go to the App Store on your iPhone/iPad or to the Android/Google Play market with your Android phone.
2. Search the program with the keyword eagleeyes.
Note: You might be charged for Internet access via wireless or 3G networks. For the Internet access rate
details, check with your local network operator or service provider.