Velleman IVSPROM2 Quick Installation Guide - Manual (Page 12)

IVSPROM2
V. 02 – 02/05/2012 12 ©Velleman nv
8. Basic operation
Note: some of the features and functions described below only apply to the human detection camera.
8.1 Live page
Refer to the image below.
1 system time
2 status bar
3 available disk capacity
4 recording icon
5 channel
6 motion icon
Icon Function
Icon Function Icon Function
Live audio channel (1~4) Playback audio channel (1~4) Audio channel off
Digital zoom on Digital zoom off Timer recording
Network disconnected Internet connected LAN connected
USB mouse connected
USB flash drive / device
connected
No USB device connected
Key lock PTZ mode on HDD overwrite
Administrator Operator Sequence
Recording Alarm event Motion event
Virtual fence event One way pass event Scene Change event
Human detection event Flow counting enabled
Smart zoom
Record mode: Frame Record mode: Field Record mode: CIF
DCCS connection OK DCCS connection failed
8.2 Record icon
• Manual Recording
By default, manual recording
is on when the DVR is powered on and a HDD is installed.
• Event Recording
The event icons,
/ / / / / , are shown on the display when their respective events
occurred and the related record function is on.
• Timer Recording
When timer recording is on,
is displayed on the screen.
• HDD Overwrite
Be default, the HDD overwrite function is set to ON, and
will be shown on the screen.