Banks Power Ford Trucks: (Diesel ’94 - 97 7.3L Power Stroke) Speed Control- SmartLock '94-03 - Manual (Page 4)

General Installation Practices
1.
For ease of installation of
your SmartLock Trans Brake,
please read this 14-page
Owner’s Manual before
starting any work. Become
thoroughly familiar with all
components and phases
of the installation before
beginning any work.
2.
Inspect all components
supplied for any foreign
material that may have
entered during shipping and
handling.
3.
The installation should
be performed at a time
when the vehicle has been
allowed to completely cool.
This installation requires the
installer to work near surfaces
that may remain hot after the
vehicle has been run. Failure
to allow the vehicle to cool
may result in personal injury.
4.
Pay particular attention
to the routing of wires.
Keep them away from
exhaust heat, moving parts
and sharp edges that may
cause damage. Route or
tie away from critical areas
as required. Keep all wires
a minimum of 6” from hot
exhaust parts, 8” or more
is recommended whenever
possible.
warning! never work
under any vehicle
supported only by a jack
of any kind. Do not uSe
concrete blocks or other
masonry items that may
collapse under the vehicle
weight.
SyStem InCLuDeS:
• SmartLock Trans Brake
• Wiring Harness
• SmartLock Connector
• Bypass Connector
• Red T-Tap (1)
• Owner’s Manual
• Warranty Statement
• Cable Ties (13)
Dear Customer,
Your new Banks
SmartLock is the
only integrated
electronic control
that seamlessly locks
the torque converter,
raises trans-mission-
line pressure,
reduces transmission
temperatures and
optimizes braking
perfor-mance
through all gears.
If you have any
questions concerning
the installation of
the Banks SmartLock
Trans Brake, please
call our Technical
Service Hotline at
(888) 839-2700
between 7:00 am
and 5:00 pm (PT).
If you have any
questions relating to
shipping or billing,
please contact our
Customer Service
Department at
(888) 839-5600.
Thank you.
4 |
9 6 9 8 1 v . 7 . 0