Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- Banks iQ "first generation Ford (03-10), Chevy (01-10), Dodge (03-07)" - Manual (Page 30)

30
96831 v.6.0
Press the ‘Wrench’ icon next to the
‘Banks iQ Home’ icon in the lower left
corner of the ‘Environment’ screen to
move to the ‘Adjustments’ menu.
Press the Left or the Right arrow to
navigate through the ‘Adjustments’
menu. Further discussion of each
adjustment option will be covered in
the following sections. See Figure 29.
-END, SEcTION 13-
Section 13
aDjUSTMENTS MENU
Figure 29 ‘Adjustments’ Menu for Power Tuner shown
To change the Banks iQ’s settings and
alerts, press the ‘Wrench’ icon to open
the ‘Adjustments’ Menu. See Figure 29.
These settings include Screen Backlight,
Touch Screen calibration, GPS Speed
calibration, Units (units of measurement),
Battery Management, (battery life
indicator and sleep settings), Version
Info (details about the Banks iQ, Tuner,
and SpeedBrake system) and Tuner/
SpeedBrake Update (upgrade, update
device firmware).
Screen Backlight
The Banks iQ can automatically dim
the system monitor LcD brightness for
nighttime operation. You can set the
‘Screen Backlight’ value that will be used,
along with the daytime operating hours.
When operating outside these hours the
screen will dim to the value you specify.
NOTE: Values are saved as they are
changed.
You can manually override your ‘Screen
Backlight’ at any time by pressing on the
Day/Night Switch icon on the upper left
corner of your Banks iQ screen in the
Power, Safety Environments, or combo
screen. See Figure 30.
1.
Press the ‘Wrench’ icon in the Power,
Safety Environments, or combo screen.
2.
Press the ‘Screen Backlight’ button in
the ‘Adjustments’ menu. See Figure 29.
Section 14
SET-UP