Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- Banks iQ "first generation Ford (03-10), Chevy (01-10), Dodge (03-07)" - Manual (Page 39)

96831 v.6.0
39
Max Values allow you to observe
the maximum values that have been
achieved for the parameters available for
your vehicle since the last Reset cycle.
See Figure 41.
1.
To view Max Values, in the
‘Adjustments’ menu press the Max value
button.
2.
After viewing your Max Values you
can reset to clear the current values.
Press the ‘Reset’ button in the lower
right hand corner. A pop-up screen will
appear to confirm reset. Press ‘yes’ to
confirm reset value, press ‘no’ to cancel
reset.
3.
After viewing your Max Values, press
the ‘Banks iQ’ icon to return to the
Environment screen or the ‘Return’ icon
to return to the ‘Adjustments’ menu.
-END, SEcTION 20-
Section 20
MaX VaLUES
Figure 41
The current version of the Banks
iQ, Banks Power Tuner, and/or
SpeedBrake can be checked and
compared to the current version
available on the Banks website.
1.
In the ‘Adjustments’ menu press
the ‘Version Info’ button.
2.
The version Info screen will display
the current firmware version, as well
as various other system configuration
information. See Figure 42.
3.
Press the arrows to scroll through
the ‘Version Info’ screen. All available
device information will be displayed.
4.
Press the ‘Return’ icon to return
to the ‘Adjustments’ Menu or press
the ‘Banks iQ’ icon to return to the
Environment screen.
-END, SEcTION 21-
Section 21
VERSION INFO