Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- Banks iQ "first generation Ford (03-10), Chevy (01-10), Dodge (03-07)" - Manual (Page 7)

96831 v.6.0
7
IN-VEHICLE PRECaUTIONS
use this unit in 12V/24V Dc
negative ground vehicles only.
WaRNING: Below 32 o F (0 o C) or
above 140 o F (60 o C), the Banks iQ
may be susceptible to damage as a
result of extended direct exposure
to sunlight, heat, or extreme cold.
It is highly recommended that the
Banks iQ be removed from its
mounting location if the vehicle
will be subjected to these
conditions for an extended period
of time. Gale Banks Engineering is
not responsible for damage to
Banks iQ resulting from exposure
conditions.
Always drive in accordance with
traffic rules and regulations. Failure
to do so may result in traffic accident
and injury to yourself and/or others.
Never take your eyes off the
road to adjust Banks iQ settings
or change screens while driving
vehicle. Doing so can result in a traffic
accident. Always stop your vehicle in a
safe place before operating the unit.
only look briefly at Banks iQ screen
images while operating your
vehicle. Doing otherwise can take
your mind off the road and create the
risk of a traffic accident and injury to
yourself and/or others.
Do not set volume level too high.
Blocking out the sound of other
vehicles and traffic can create the risk
of a traffic accident.
Never use headphones while
operating a motor vehicle. This can
create the risk of a traffic accident and
may be considered illegal.
Never install Banks iQ in a location
where it will interfere with
operation of the motor vehicle,
block the driver’s view, or where it
may endanger passengers. Installing
the unit near the shift lever, brake
pedals or other vehicle controls, or
block front, side or rear vision, can
create the risk of a traffic accident and
cause injury to yourself and/or others.
Never install Banks iQ where it can
interfere with airbag operation.
Do not install in a location where
deployment of the airbag cause Banks
iQ or its parts to become projectiles.
Also, be sure to check installation
precautions for your exact vehicle
model and year.
Make sure to install the Banks iQ
mount so it does not come off or
fall down. clean off any dirt and
wax from the installation location,
and install securely. Using or re-using
two-sided tape will cause inadequate
adhesion, causing the mount to
come off and can cause an accident.
Periodically check the adhesion and
installation condition of the cradle.
PRECaUTIONS FOR USE IN VEHICLE
use only the items that come with
this unit and the Banks products it
was designed to interface with. Use
of non-specified items can damage
the vehicle interior or result in a
poor fit, creating the risk of accident,
malfunction, or fire.
Install Banks iQ where it is out of
the reach of small children. Failure
to do so can cause an injury to the
child or others due to mishandling of
Banks iQ.
Do not install Banks iQ in a location
where it will be splashed by water
or subjected to large amounts
of humidity, dust, or oil smoke.
This can increase the risk of smoke,
combustion, electric shock, and
accident.