Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- Banks iQ "first generation Ford (03-10), Chevy (01-10), Dodge (03-07)" - Manual (Page 32)

32
96831 v.6.0
4.
While maintaining a steady speed,
press ‘calibrate’. During the calibration
process. The GPS speed and the vehicle
speed will be displayed. When the on-
screen progress bar disappears from
view, Speed calibration is complete. See
Figure 32.
5.
The calibrated speed can be adjusted
manual. Press the plus (+) or minus (-)
symbol to increase or decrease the
speed calibration.
6.
Use the ‘On’ and ‘Off’ buttons to
display the corrected speed in the gauge
environments on your Banks iQ.
7.
Press the ‘Banks iQ’ icon on the
lower left hand corner to return to the
Environment screen. Press the ‘Return‘
icon to go back to the ‘Adjustments’
menu.
English/ Metric
1.
To change the unit of the displayed
gauges, press the ‘English/ Metric’ button
in the ‘Adjustments’ menu.
2.
Press the desired unit to be displayed
on the gauges. choose between English
units or Metric units.
3.
Press the ‘Banks iQ’ icon on the
lower left hand corner to return to the
Figure 32
Figure 33