Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- Banks iQ "first generation Ford (03-10), Chevy (01-10), Dodge (03-07)" - Manual (Page 34)

34
96831 v.6.0
To update Tuner/SpeedBrake
1.
Go to www.bankspower.com/Banks
iQ and check for the Banks Power Tuner
or SpeedBrake updates. To receive
update notices, we invite you to register
at www.bankspower.com/banksiq
to receive important e-mails regarding
updates and upgrades for your Banks iQ
device.
2.
Download them onto your Micro-SD
card (sold separately) and insert it into
the port on your Banks iQ.
3.
Press the ‘Update Tuner’ or the
‘Update SpeedBrake’ button on the
‘Adjustments’ menu.
4.
Press the ’check For Updates’ button
and available Tuner/SpeedBrake updates
will appear in the window. See Figure
35. Highlight the appropriate file name
from the available list.
5.
Press ‘Update Tuner’ or ‘Update
SpeedBrake’ to download updates into
Banks iQ.
NOTE: A warning message will appear if
the chosen file is the same or older then
the file currently in use.
To update Banks iQ Software
1.
For Windows XP users, make sure
that microsoft ActiveSync is installed
on your computer and that you have an
active internet connection.
NOTE: If you do not have ActiveSync visit
www.microsoft.com/windowsmobile.
For Windows 7 and Vista users, connect
the iQ to your PC to automatically start
the Windows Mobile Device Center
installation.
2.
Install the Banks iQ Update Utility
on your computer by visiting www.
BanksPower.com/Downloads.
3.
Turn the Banks iQ on and allow it to
complete its booting process (about a
minute) then plug the Banks iQ into your
Pc using the supplied USB cable.
4.
Start the Banks iQ Update Utility and
follow the on-screen directions on your
Pc to update your Bank iQ with the latest
software updates.
-END, SEcTION 14-
Section 15
GaUGE PLaCEMENT
NOTE: To quickly change any gauge
in your Banks iQ display, press on the
gauge you want to change and you
will be taken to the ‘Gauge Placement’
screen. See Figure 36.
Press the ‘Wrench’ icon to move to
the ‘Adjustments’ menu. Press ‘Gauge
Placement’, which allows you to change
the gauges on view in the display.
1.
Press the gauge you want to move or
change on the right-hand side. A list of
gauges to choose from appears on the
left. See Figure 36.
2.
Scroll Up or Down through the
optional parameters available on the left
hand side of the screen.
3.
Highlight the desired parameter on
the left side of the screen.
4.
Repeat Step 1 through 3 to change all
desired gauges.
5.
To save changes, press on the ‘Banks
iQ’ icon to return to the ‘Environment’
screen or the ‘Return’ icon to return to
the ‘Adjustments’ menu.