Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- Banks iQ "first generation Ford (03-10), Chevy (01-10), Dodge (03-07)" - Manual (Page 41)

96831 v.6.0
41
6.
check all Banks Power Tuner and/
or SpeedBrake wiring, power, and
fuse connections (refer to the Banks
Power Tuner and/or SpeedBrake user’s
manual(s) for troubleshooting details).
Loss of Tuner-added power
7.
check to make sure the Banks
iQ’s Status Window displays the
“OK” message, indicating the tuner
is powered-up and communicating
properly.
8.
check the Banks iQ Power Level
Indicator for the proper setting (Power
Level “1” is stock vehicle power).
9.
check the Banks iQ Status Indicator
for the “OK” icon. Any Banks Power
Tuner fault will be indicated by the
check Engine icon shown in Figure 44.
Simply press on the ‘Banks’ Engine icon
to go to the ‘Power Diagnostics’ menu.
Or, press on the ‘Wrench’ icon to go to
the ‘Adjustments’ menu. Press on the
Diagnostics button, then press Power
Diagnostics.
10.
Refer to the Banks Power Tuner
user’s manual for further troubleshooting
details.
-END, SEcTION 22-
Figure 44
Banks Engine
Icon