Grain Systems PNEG-1472 - Manual (Page 17)

4. Installation Instructions
PNEG-1472 L & B Series Field Installation 17
heater module.
7. Install (2) item #13 (401-3850-5) outer roof frame channels as shown in Figure 4E.
8. Install (2) item #15 (401-3945-3) reclaimer roof panels as shown in Figure 4E.
9. Install (2) item #7 louver assemblies with the adjusting screw located at the bottom. Untie the
adjusting screw and feed it through the hole located in the reclaimer floor panel. It will be
necessary to remove them reinstall the handle weldment in order to do this.
10.Install (2) item #14 (401-3998-2) fan reclaimer side panels-short, (2) item #12 (401-3968-5)
sidewall braces, (2) item #18 (401-3996-6) door frame channeld, (2) item #6 (401-3995-8) fan-
heater access doors and door latches as shown in Figure 4E.
11.All attaching hardware may now be tightened.