Safety decals – Grain Systems PNEG-1472 User Manual
Page 8
8 PNEG-1472 L & B Series Field Installation
3. SAFETY DECALS
The GSI Group, Inc. recommends contacting your local power company, and having a representative
survey your installation so the wiring is compatible with their system, and adequate power is supplied to
your unit. Safety decals should be read and understood by all people in the grain handling area.
If a decal is damaged or is missing contact:
The GSI Group, Inc.
1004 E. Illinois St.
Assumption, IL 62510
Ph: (217) - 226 - 4421
A free replacement will be sent to you.
Moving parts can crush
and cut. Keep hands
clear. Do not operate
without guards in place.
Failure to do so could
result in serious injury.
DC-972
Decal DC-1224 is located in two places on the fan/heater control box.
One on the lid and one on the front of the fan heater control box.
Another location for this decal is inside the upper control box for the
dryer.
Decal DC-889 has two locations. One inside the fan/heater
control box and another on the dryer upper control box door
next to the main power disconnect.
Decal DC-972 is located on the bottom auger belt guard and the front
bearing plate (which is visible when then bottom auger belt guard is
removed). An alternate location would be at the rear of the dryer for
portable dryers equipped with the Front Discharge Option.