Installation instructions – Grain Systems Bin Flooring PNEG-529 User Manual
Page 11
Advertising
![background image](/manuals/277656/11/background.png)
2. Recommended Method for Full Floor Installation
PNEG-529 Cor-Lok and Cut-Lok Flooring for Non-GSI Bin Diameter
11
Installation Instructions
1. When a splice is needed, plank length A as described in the floor manual should be installed
alongside plank length B.
2. The under-splice should then be installed under the split of plank A and B. The splice should extend
3" under each plank. The splice should be screwed in place as shown in
.
3. This process will be repeated for all plank locations requiring a splice.
Figure 2E
Advertising