Ils on, Roof assembly for 27' through 30' bins (continued) – Grain Systems Tanks PNEG-1092 User Manual
Page 31
Advertising
7. Farm Roof Assembly
PNEG-1092 30° Bin Roof Construction
31
Roof Assembly for 27' through 30' Bins (Continued)
NOTE: Reference seal clip details on
for assembling the peak cap and slide rods.
Prior to assembly of roof and center collar, you will need to position the flashing so the cap hold-down
is in line with roof ladder. Two (2) holes per flashing section are provided for the hold-down bracket.
Pre-assemble center collar and flashing pieces together before attaching roof panels to flashing. TIGHTEN
ALL BOLTS, EXCEPT FOR THE TWO (2) LOWER FLASHING SEAM BOLTS.
Figure 7H Cross Section View
Figure 7I Flashing Detail
Advertising