Grain Systems Tanks PNEG-1092 - Manual (Page 84)

12. 48' Farm Roof Support System
84 PNEG-1092 30° Bin Roof Construction
Optional Grain Bin Eave Seal Installation
Figure 12I
Before placing the eave clips on sidewall, install eave seal around top edge of the first ring of sidewall.
Take a piece of the tab seal foam block and peel off paper back and place on eave clip as shown in
Figure 12I . One per eave clip. When properly placed on eave clip and roof sheet installed, it should give
weather tight seal around roof rib. Be sure to use proper size of foam block.