Heater power connection – Grain Systems PNEG-588-04 User Manual
Page 15
Advertising
5. Installation
PNEG-588-04 Deluxe Downwind Heater Installation and Operation
15
Heater Power Connection
1. Connect power cord to fan control box.
2. Make field connections in fan box as shown in
3. Connect deluxe thermostat control as shown in
.
NOTE: Heater control is 120V only.
Figure 5E
CAUTION
Heater must be interlocked with fan for safe operation.
CAUTION
Thermostat must be installed for safe operation.
Heater power is 120 VAC. Damage will occur if connected to high voltage
power source.
Advertising