Grain Systems PNEG-588-04 - Manual (Page 28)

6. Operation
28 PNEG-588-04 Deluxe Downwind Heater Installation and Operation
Adjusting the Vaporizer
1. Vaporizer should be adjusted so the vapor pipe train runs warm to the touch (100°-120°F).
2. Loosen 5/16" pivot bolts on adjustment bracket.
3. Tilt vaporizer away from burner to cool. Tilt toward burner to heat. Vaporizer may be raised or lowered
for vertical adjustments.
4. Tighten 5/16" pivot bolts to fix vaporizer position.
IMPORTANT: Only move vaporizer 1" at a time. Allow heater to run a few minutes for temperature
to equalize.
Figure 6B Figure 6C
Vaporizer adjustment: Away from burner to cool. Toward burner to heat.
Ref # Description
A Pivot Bolts
B Cooler
C Warmer