Grain Systems PNEG-588-04 - Manual (Page 7)

3. Decals
PNEG-588-04 Deluxe Downwind Heater Installation and Operation 7
Safety decals should be read and understood by all people in the grain handling area. If a decal is
damaged or is missing contact:
GSI Decals
1004 E. Illinois St.
Assumption, IL. 62510
Phone: 1-217-226-4421
A free replacement will be sent to you.
Stay clear of rotating
blade. Blade could start
automatically. Can cause
serious injury. Disconnect
power before servicing.
DC-1225 GSI Group 217-226-4421
WARNING
Flame and pressure beyond
door. Do not operate with
service door removed. Keep
head and hands clear. Can
cause serious injury.
DC-1227
WARNING
GSI Group 217-226-4421
DANGER
HIGH VOLTAGE
Will cause injury
or death.
Lockout power
before servicing.
DC-889 GSI Group Inc. 217-226-4421
Thermostat must be installed for
operation.
Failure to do so may damage
equipment and cause fire.
DC-1702
NOTICE NOTICE
Le thermostat doit être installé
pour fonctionner.
Omettre cette installation peut
endommager l’équipement et
provoquer un feu.
GSI Group 217-226-4421
Part #: DC-1225
Size: 4-7/8" x 2-1/4"
Located above access door on heater housing.
(See Note Below.)
Part #: DC-1227
Size: 4-7/8" x 2-1/4"
Located above access door on heater housing.
(See Note Below.)
NOTE: May be substituted with
DC-1559 combination decals.
Part #: DC-889
Size: 2.813" x 1.375"
Located inside control box.
Part #: DC-1702
Size: 1-1/2" x 3-1/4"
Located on the outside of the control box lid.