Decal sheet placement, Chapter 4 decal sheet placement – Grain Systems Tanks PNEG-1000 User Manual
Page 16
Advertising
16
PNEG-1000 2.66" Commercial Tank Stiffener and Sidewall
4. Decal Sheet Placement
NOTE: The decal sheets are located in the second ring from the top. They are to be spaced evenly around
the diameter of the bin.
Figure 4A 2 Post (Two (2) rows of stiffeners used on each sidewall sheet.)
NOTE: On 3 post bins the top ring is not normally stiffened except for 42' diameter and larger bins with
stiffeners, (one per sidewall panel). Refer stiffener to sidewall attachment detail and specific gauge
sheet for the bin.
Figure 4B 3 Post (Three (3) rows of stiffeners used on each sidewall sheet.)
NOTE: Dashed lines represent stiffener locations.
NOTE: Dashed lines represent stiffener locations.
Advertising