Weather cover assembly, Accessory instructions – Grain Systems Tanks PNEG-1000 User Manual

Page 91

Advertising
background image

13. Accessory Instructions

PNEG-1000 2.66" Commercial Tank Stiffener and Sidewall

91

Weather Cover Assembly

Weather Cover Assembly Instructions for Roller Valve

1. Install weather cover kit after gate has been installed.

2. Use bead caulking at all seams where weather cover attaches to gate.

3. Use 5/8" x 3/4" bolts and nuts to plug all holes not in use.

4. Use 1/4" self-drillers to seal gate end plate corners.

(See Figure 13H.)

Figure 13H

Ref #

Part #

Description

A

CHT-1351

Universal Weather Cover Plate

B

Chain Wheel (Typical)

Advertising
See also other documents in the category Grain Systems Equipment: