Grain Systems Tanks PNEG-1000 - Manual (Page 74)

11. Stiffener Instruction (Outside Stiffened)
74 PNEG-1000 2.66" Commercial Tank Stiffener and Sidewall
Laminated Stiffener to Sidewall Detail (Continued)
Figure 11O Outside Stiffened Laminated Stiffener to Sidewall Detail (10 Gauge Laminated and Thicker Only)
Ref # Description
A 3/8" Bin Bolt with a Steel Backed Neoprene Washer
B 3/8" Flange Nut (S-9373)
C Two (2) Laminated Stiffeners
D Outside of Bin
E
Place a sealing washer (S-9467) between the stiffener and sidewall sheet on the first
stiffener to sidewall bolt down from the horizontal seam (close punched laminated,
10 gauge and thicker only). Placing a small amount of tube caulk on the washer placing
on the sidewall is a aid to installation.