Grain Systems Unload Augers PNEG-1079 - Manual (Page 12)

12 PNEG-1079 6", 8" and 10" Vertical Bin Unload Auger
4. Assembly Instructions
Attaching Vertical to Bin
1. First, slide out enough bin unload flight to connect it to the connecting stub.
2. Attach the bin unloading flight and the horizontal flight to the connecting stub using two (2)
3/8" x 2" hex head cap screws for 6", two (2) 7/16" x 2-1/2" hex head cap screws for 8" or two (2)
1/2" x 3" hex head cap screws for 10" with lock nuts.
(See Chart.) (See Chart on Page 20 for proper
bin unloading flight.)
3. Slide bin unloading flight into unloading tube. With vertical auger in upright position, attach flanges
together using 5/16" x 3/4" bolts with hex nuts. (See Figure 4A below and Figure 4B on Page 13.)
4. Adjust stands so they hold the weight of the vertical auger. (See Figure 4A.)
Figure 4A 8" Shown
Connecting Stub Bolts
6" Use Two (2) 3/8" x 2" Bolts
8" Use Two (2) 7/16" x 2-1/2" Bolts
10" Use Two (2) 1/2" x 3" Bolts