Grain Systems Unload Augers PNEG-1079 - Manual (Page 18)

18 PNEG-1079 6", 8" and 10" Vertical Bin Unload Auger
5. Operation Procedures
Inspect the Auger
After delivery of the new auger and/or completion of assembly and before each use, inspection of the
machine is mandatory. This inspection should include, but not be limited to:
1. Check to see that all guards listed in the assembly instructions are secured in place and functional.
2. Check all safety signs and replace any that are worn, missing or illegible. They are listed in the front
in the decal section on Pages 9 and 10 of this manual. Safety signs may be obtained from the dealer
or ordered from the factory.
3. Check to see if all the fasteners are tight.
Designate a Work Area
Designate a large perimeter around the auger for a work area.
Operating Procedures
During the operation of the auger, one person shall be in a position to monitor the operation. Inspect the
drive before adding power and know how to shut down in an emergency.
(See Page 19.) Visually inspect
the auger periodically during operation. For efficient and safe operation, be aware of all the adjustments
and checks which should be performed.
Under no circumstances should persons not involved in the operation be
allowed to trespass into the work area.
WARNING
It shall be the duty of all operators to see that children and/or other persons stay
out of the work area. If anyone not involved in the actual operation trespasses
into the work area, it shall result in an immediate shut down by the operator.
WARNING
It shall be the responsibility of all operators to see that the work area has secure
footing, is clean and free of all debris and tools which might cause accidental
tripping and/or falling.
DANGER
Make certain everyone is clear before operating equipment.
WARNING
The operator shall be aware of any unusual vibrations, noises and the loosening
of any fasteners.
CAUTION
Keep all safety shields and devices in place.
DANGER
Keep hands, feet and clothing away from moving parts
DANGER
Shut off and lock out power to adjust, service or clean.
DANGER