Grain Systems Unload Augers PNEG-1057 - Manual (Page 11)

Decals
3
PNEG 1057 - 8" & 10" Commercial Vertical Bin Unloading Auger
Safety Decals
A. DANGER Sign No. DC-1395 was supplied with your bin unloading equipment. This safety sign should be applied
to the side of the bin near the bin opening, so it will be viewed by people entering into the bin storage building.
Do not cover any safety signs or any other signs that are already there.
B. If the safety sign location suggested is not in full view because of equipment modifications, other equipment in
the area, or any reason, then locate the safety sign in a more suitable location.
C. Be certain the surface is clean, dry and free of dirt and oil. Peel paper backing from decals and stick into place.
The adhesive backing will bond on contact.
THIS BIN IS EQUIPPED WITH GRAIN AUGERS
WHICH CAN KILL OR DISMEMBER.
ROTATING FLIGHTING!
KEEP CLEAR OF ALL AUGERS AND NEVER ENTER
THIS BIN UNLESS ALL POWER IS
DISCONNECTED AND LOCKED OUT.
FAILURE TO DO SO WILL RESULT IN
SERIOUS INJURY OR DEATH!
DC-1395
If the Safety Sign cannot be easily read for any reason or has been p ainted over,
replace it immediately. Additional Safety Signs may be obtained free of charge from
your dealer, distributor, or ordered from the factory.
Order SAFETY SIGN NO. DC-1395
Please remember, safety signs provide important safety information for people
working near bin unloading equipment that is in operation.