Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1807 - Manual (Page 35)

PNEG-1807 16"-24" Bucket Elevator Platform and Ladder “X” Series 35
7. Rest Platform
Chapter 7: Rest Platform
Rest Platform Tie Angles to Bucket Elevators
1. Install rest platform tie angles to the lower trunking on both the ladder side and non-ladder side of the
trunking. Use 1/2" x 1" bolts through the bolt holes indicated for the bucket elevator size being
installed.
(See Figure 7A.)
NOTE: Bolt hole starting location on left side of tie angle is marked with the bucket size.
Figure 7A Tie Angle with Etched Numbers