Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1807 - Manual (Page 53)

8. 16"-24" Head Platform Assembly
PNEG-1807 16"-24" Bucket Elevator Platform and Ladder “X” Series 53
Install Adapter Bracket for 16" Platforms
NOTE: The adapter bracket attaches to decking and toe boards. The flanges should be to the outside of
Deck A and Deck C.
1. Using three (3) 3/8" x 1" carriage bolts (S-3585) and 3/8" flange nuts (S-10028), install the adapter
bracket to cross deck support channel at the up-leg end of the platform between Deck A and side toe
board and between Deck C and side toe boards.
(See Figure 8K.)
2. Attach deck adapter bracket (HP1624AB) to Deck A, Deck C and toe boards using four (4) 3/8" x 1"
bolts (S-7105) and nuts. (See Figure 8L.)
Figure 8K Deck Adapter Bracket to Channel
Figure 8L Deck Adapter Bracket to Decks