Grain Systems Unload Augers PNEG-1050 - Manual (Page 2)

2 12" & 14" Commercial Bin Sweep Augers PNEG-1050
DO NOT STORE SWEEPS IN THE BIN!
Sweeps are NOT designed to remain in a bin during
filling, storage, or bottom (gravity) unloading. A sweep
left in a bin during these operations may be serverly
damaged. The GSI Group, Inc. will not be responsible for
such damages.
The following action may reduce damages to a sweep
remaining in a bin: Lifting the sweep off the center pivot,
positioning it parallel to the intermediate wells (along
side of - not on top of) and fully supporting the sweep to
the bin floor. However, even with this procedure, The
GSI group, Inc. will not be responsible for any damges to
the sweep.