Setting the temperatures – Grain Systems PNEG-1458 User Manual
Page 39
Advertising
8. Dryer Operation
PNEG-1458 T-Series Tower Dryer
39
Figure 8B
Setting the Temperatures
Setting the temperature set points for the dryer is a simple procedure. To adjust the temperature
set points touch the
button at the bottom of Operation screen. A new screen will appear called the
Select Temperature Set Point to Modify screen.
As you can see you modify the set point
for the plenum by touching the Plenum 1 Temperature button.
The plenum temperature set point range is 80°F-250°F and the current temperature set point for each
plenum is displayed next to the corresponding Plenum button.
Figure 8C
Advertising