Grain Systems PNEG-1877 - Manual (Page 19)

Chapter 3 Eave Platform
Eave Starter Bracket and Ladder Assembly
1. The ladder starter brackets must be located in line with the top horizontal seam.
2. Attach ladder to the starter brackets using the hole located 1" from top of the ladder.
3. Field drill the second 3/8" hole for the starter bracket on the ladder 2" below the hole 1" from the top
of the ladder.
4. All standoff brackets must be installed every 44" and attached to each 4' ladder section required.
5. Use 5/16" x 3/4" bin bolts for these connections.
Figure 3-3 Eave Starter Bracket for Ladders
Pneg-1877 Top Dry Ladders, Safety Cage, and Platforms 19