Grain Systems PNEG-1877 - Manual (Page 21)

Chapter 3 Eave Platform
Adjustable Eave Braces
An eave adjustable brace is comprised of one large diameter tube and two (2) smaller tubes.
1. Slide the smaller tubes inside the larger tube and attach one smaller tube to the top of the ladder
extension rail.
2. Adjust the other smaller tube so the bottom of the flattened tube reaches the roof panel.
3. Field drill four (4) 5/16" holes through both large and small tubes and bolt together using 1/4" x 1-1/2"
bolts and nuts to prevent the adjustable braces from sliding.
Pneg-1877 Top Dry Ladders, Safety Cage, and Platforms 21