Inner door assembly (continued) – Grain Systems Tanks PNEG-2135 User Manual
Page 84
Advertising
10. 2.66" Commercial Tank Accessories Installation
84
PNEG-2135 Construction Manual for 2.66" Corrugation 135' Diameter Tank
Inner Door Assembly (Continued)
shows the hinge and handle assembly onto the upper and lower inner doors. Note the hinge
orientation in detail C of
. 5/16" x 3/4" Bolts (S-275) and nuts (S-396) are used at most
attachment points.
for 5/16" x 1-1/4" bolt (S-277) and 5/16" x 3/4" truss head bolt
(S-4303) usage. Note usage of latch bushing (WD-6040) where the right hand and left hand latches
(WD-6037 and WD-6038) connect to the reinforcement angle (NCWT0158). The right and left hand
latches should be placed inside the reinforcement angles and attached using 5/16" lock nuts (S-5220).
Figure 10W
Advertising