Cobalt Digital COMPASS 9374-EMDE Quad-Stream SDI – AES – MADI Embedder_De-embedder - Manual (Page 33)

937X-OM (V1.3) 9374-SERIES PRODUCT MANUAL 3-1
Chapter 3
Chapter 3
Operating Instructions
Overview
This chapter contains the following information:
• Control and Display Descriptions (p. 3-1)
• Accessing the 9374-Series Card via Remote Control (p. 3-5)
• Checking Card Information (p. 3-7)
• Considerations Regarding Multiple-Channel SDI (p. 3-8)
• 9374-Series Function Submenu List and Descriptions (p. 3-9)
• Troubleshooting (p. 3-30)
Control and Display Descriptions
This section describes the user interface controls, indicators, and displays
(both on-card and remote controls) for using the 9374-Series card. The
9374-Series card functions can be accessed and controlled using any of the
user interfaces described here.
The format in which the 9374-Series card functional controls, indicators, and
displays appear and are used varies depending on the user interface being
used. Regardless of the user interface being used, access to the card functions
(and the controls, indicators, and displays related to a particular function)
follows a general arrangement of Function Submenus under which related
controls can be accessed (as described in Function Submenu/Parameter
Submenu Overview below).
After familiarizing yourself with the arrangement described in Function
Submenu/Parameter Submenu Overview, proceed to 9374-Series Function
Submenu List and Descriptions (p. 3-9) for detailed control descriptions and
usage instructions.
Note: When a setting is changed, settings displayed on DashBoard™ (or a Remote
Control Panel) are the settings as effected by the card itself and reported back
to the remote control; the value displayed at any time is the actual value as set
on the card.
If you are already familiar with
using DashBoard or a Cobalt
Remote Control Panel to control
Cobalt cards, please skip to
9374-Series Function Submenu
List and Descriptions (p. 3-9).