Cobalt Digital COMPASS 9374-EMDE Quad-Stream SDI – AES – MADI Embedder_De-embedder - Manual (Page 57)

937X-OM (V1.3) 9374-SERIES PRODUCT MANUAL 3-25
Operating Instructions
9374-Series Function Submenu List and Descriptions
(continued)
• LTC Tx over Audio Channels Each audio channel destination supported by the card can use an LTC
encoder as its source. These destinations are:
• SDI A thru D Emb Ch 1-16
• MADI Ch 1-64
• AES Ch 1-16
Note: Although LTC can be routed indirectly to an anlog audio output via
a monitored digital audio channel (i.e., setting the Analog Out to
link to a digital channel carrying LTC, this is recommended only as
a basic presence check and cannot be used as an analog audio
LTC output, as the card analog outputs are unbalanced and do not
meet the expected 24 dBu criteria of standard analog audio LTC.
Table 3-1 9374-Series Function Submenu List — continued
+LTC
In this example, encoder LTCA is selected as an export source via SDI A, Emb Ch 6. Routing LTCA thru LTCD to any
embedded, AES, or MADI destiniation output channel is performed similarly.
LTCA thru LTCD can be routed to any digital audio channel (for example, LTCA could also be routed to SDI C Emb Ch 6).
• • •