Cobalt Digital COMPASS 9374-EMDE Quad-Stream SDI – AES – MADI Embedder_De-embedder - Manual (Page 46)

3
9374-Series Function Submenu List and Descriptions
3-14 9374-SERIES PRODUCT MANUAL 937X-OM (V1.3)
AES/Analog Audio Crosspoint
Provides an audio crosspoint to route any of the card
source audio channels to AES destination output
channels and the card analog audio output monitor pair.
Note: 9372 and 9371 cards do not have SDI C and SDI D channel source columns. 9372 has SDI A and
SDI B channel source columns; 9371 has SDI A channel source column.
Table 3-1 9374-Series Function Submenu List — continued
Radio buttons allow selecting a source channel for each destination AES output channel and/or the card analog audio monitor
pair. Route a source to an output channel by pressing the button where the destination row intersects the source column.
In the example above, the following routing is performed:
Source (Input for AES channel out)
AES OUT
Destination Channels
SDI C IN Ch 1 (SC01) AES Ch 1
SDI C IN Ch 2 (SC02) AES Ch 2
SDI C IN Ch 3 (SC03) AES Ch 3
SDI C IN Ch 4 (SC04) AES Ch 4
SDI C IN Ch 5 (SC05) AES Ch 5
SDI C IN Ch 6 (SC06) AES Ch 6
SDI C IN Ch 7 (SC07) AES Ch 7
SDI C IN Ch 8 (SC08) AES Ch 8
OUTPUT
(destination)
channel rows)
AES OUT (1-16)
and
Analog 1/2 OUT
INPUT (source) channel columns:
• SDI A IN – SDI A embedded channels 1 - 16 (short form ID: SA01 - SA16)
• SDI B IN – SDI B embedded channels 1 - 16 (short form ID: SB01 - SB16)
• SDI C IN – SDI C embedded channels 1 - 16 (short form ID: SC01 - SC16)
• SDI D IN – SDI D embedded channels 1 - 16 (short form ID: SD01 - SD16)
• MADI IN 1-16 – MADI channels 1 - 16 (short form ID: MA01 - MA16)
• MADI IN 17-32 – MADI channels 17 - 32 (short form ID: MB01 - MB16)
• MADI IN 33-48 – MADI channels 33 - 48 (short form ID: MC01 - MC16)
• MADI IN 49-64 – MADI channels 49 - 64 (short form ID: MD01 - MD16)
• AES IN 1-16 – AES-3id channels 1 - 16 (short form ID: A01 - A16)
• Tone Generators 1-16 – discrete generators 1 - 16 (short form ID: T01 - A16)
• Silence
Analog 1/2 OUT radio buttons provide direct
routing of selected channels to the card stereo
analog audio monitor outputs. Selecting
another monitor input clears any prior
selection. (Selections made here are reflected
on the Input Meters tab, with changes made
on either tab correspondingly reflected on the
other.)
In this example, SDI IN C embedded input
channels 1 and 2 (SC01, SC02) are routed to
the card analog monitor outputs.
Note: Accessed on the Input Meters or Output
Meters tabs are AES pair direction
controls. Make certain pair direction is set
as desired.