Checking card information, Checking card information -7, Checking card information (p. 3-7) – Cobalt Digital COMPASS 9374-EMDE Quad-Stream SDI – AES – MADI Embedder_De-embedder User Manual
Page 39: Operating instructions
937X-OM (V1.3)
9374-SERIES PRODUCT MANUAL
3-7
Operating Instructions
Checking Card Information
Checking Card Information
The operating status and software version the 9374-Series card can be
checked using DashBoard™. Figure 3-4 shows and describes the card
information screen using DashBoard™.
Note:
Proper operating status in DashBoard™ is denoted by green icons for the sta-
tus indicators shown in Figure 3-4. Yellow or red icons respectively indicate
an alert or failure condition. Refer to Troubleshooting (p. 3-30) for corrective
action.
Figure 3-4 9374-Series Card Info Utility
The Tree View shows the cards seen by DashBoard™.
In this example, Network Controller Card MFC-8320-N
(serial number ...8053) is hosting a 9374 card in slot 6.
Status Displays
Clicking the Status sub-tab shows the status the signal being
received by the 9374, and other card conditions.
Clicking the Product sub-tab shows product information such
as card model, options installed, and firmware versions. Use
this information when communicating to Cobalt
®
regarding the
card.