Cobalt Digital COMPASS 9374-EMDE Quad-Stream SDI – AES – MADI Embedder_De-embedder - Manual (Page 41)

937X-OM (V1.3) 9374-SERIES PRODUCT MANUAL 3-9
Operating Instructions
9374-Series Function Submenu List and Descriptions
9374-Series Function Submenu List and Descriptions
Table 3-1 individually lists and describes each 9374-Series card function
submenu (“tab”) and its related list selections, controls, and parameters.
Where helpful, examples showing usage of a function are also provided.
Table 3-1 is primarily based upon using DashBoard™ to access each function
and its corresponding submenus and parameters.
Note: • All numeric (scalar) parameters displayed on DashBoard™ can be changed
using the slider controls, arrows, or by numeric keypad entry in the corre-
sponding numeric field. (When using numeric keypad entry, add a return
after the entry to commit the entry.)
• The GUI on the 9374-series cards require DashBoard™ version 4.1 or
higher. This version can be obtained by going to www.cobaltdigital.com, and
then entering “dashboard” in the search window.
• The GUI controls described here are basic routing controls if using an
OGCP-9000 or WinOGCP remote control panels. VU meter displays are
available only using DashBoard™ remote control.
• GUI controls shown here are for the 9374 card. Unless noted otherwise,
identical controls appear on the 9372 and 9371 cards.
- 9372 has only SDI A and SDI B source and destination embedded
audio paths.
- 9371 has only SDI A source and destination embedded audio path.
On DashBoard™ itself and in Table 3-1, the function submenu items are
organized using tabs as shown below.
The table below provides a quick-reference to the page numbers where each
function submenu item can be found.
Some functions use sub-tabs to help maintain clarity and organization. In these instances,
Table 3-1 shows the ordinate tab along with its sub-tabs. Highlighted sub-tabs indicate that
controls described are found by selecting this sub-tab (in this example, the Encoder Input
sub-tab).
Functions and/or features that are available only as an option are denoted in this section using this icon. When
an option is not installed, tabs and controls for the function do not appear in the card DashBoard GUI.
Function Submenu Item Page Function Submenu Item Page
Input Meters 3-10 Tone Generators 3-16
Output Meters 3-11 Flat Field Generators 3-16
SDI Audio Crosspoint 3-12 Reference Select 3-17
MADI Crosspoint 3-13 Gain Controls 3-18
AES/Analog Audio Crosspoint 3-14 Timecode 3-19
Crosspoint QuickRoute 3-15 Presets 3-29