Cobalt Digital COMPASS 9033 Input Processing Analog to Digital Video - Manual (Page 22)

1
Technical Specifications
1-18 9033 PRODUCT MANUAL 9033-OM (V4.0)
Technical Specifications
Table 1-2 lists the technical specifications for the 9033 Input Processing
Analog to Digital Video Converter with Audio Embedding card.
Table 1-2 Technical Specifications
Item Characteristic
Note: HD specifications apply only to 9033; 9033-SD only accepts and outputs SD signals.
Part number, nomenclature • 9033 – Input Processing Analog to Digital Video Converter with
Audio Embedding
• 9033-DEC – Input Processing Analog to Digital Video Converter
with Audio Embedding and Dolby
®
Decoding Option
• 9033-SD is functionally equivalent, but processes only SD
analog video with a resulting SMPTE 259M SDI output
Installation/usage environment Intended for installation and usage in frame meeting openGear ®
modular system definition.
Power consumption < 13 Watts (not including Dolby decoder)
Environmental:
Operating temperature:
Relative humidity (operating or storage): 32° – 104° F (0° – 40° C)
< 95%, non-condensing
Frame communication 10/100 Mbps Ethernet with Auto-MDIX.
Indicators Card edge display and indicators as follows:
• 4-character alphanumeric display
• Status/Error LED indicator
• Input Format LED indicator
Controls Card edge switches as follows:
• Menu Enter pushbutton switch
• Menu Exit pushbutton switch
• Up/down selection toggle switch
Internal Tone Generators Four built-in tone generators, each configurable for 18 discrete
sine wave frequencies ranging from 50 Hz to 16 kHz.
Generator source signal level is equivalent to -20 dBu.