Cobalt Digital COMPASS 9033 Input Processing Analog to Digital Video - Manual (Page 44)

3
Accessing the 9033 Card via Remote Control
3-6 9033 PRODUCT MANUAL 9033-OM (V4.0)
Accessing the 9033 Card Using a Cobalt ® Remote Control Panel
Press the Select Device key and select a card as shown in the example below.
Card Access/Navigation
Tree Pane
Card Info
Pane
Card Function Submenu
and Controls Pane
9033_ DB_ACCESS3A3.PNG
This display shows the list
order number of the device that
is ready for selection
This display shows the devices assigned to the Control Panel.
• Rotate any knob to select from the list of devices. The device selected using a knob
is displayed with a reversed background (in this example,
“1 9033 - Receiver 21 Input Processing”).
• Directly enter a device by entering its list number using the numeric keypad, and
then pressing Enter or pressing in any knob).
9033_3366_3392.JPG