Cobalt Digital COMPASS 9033 Input Processing Analog to Digital Video - Manual (Page 75)

9033-OM (V4.0) 9033 PRODUCT MANUAL 3-37
Operating Instructions
9033 Function Submenu List and Descriptions
(continued)
Note: • 2.0-to-5.1 upmixer function is an optional licensable feature. This function and its controls appear only when a license
key is entered and activated. Refer to Licensable Features function description on page 3-40 for more information.
• Channel sources used by the upmixer are post-processed signals received from the Audio Routing/Gain Control
function. When active, the channel selections made using this function are directly embedded in the output SDI or
AES discrete pairs. Refer to 2.0-to-5.1 Upmix Function (p. 1-10) in Chapter 1, “Introduction” for detailed functional
description and signal flow.
• For any six channels selected for this function, the Left and Right channel selections always serve as the stereo input
pair.
• 2.0-to-5.1 Up Mixer Selection Separate drop-down lists for Left, Right, Center, LFE, Left Surround,
and Right Surround allow AES audio source selection, and channel
assignments for the six generated 5.1 channels.
The example below shows selection of AES channels 1 and 2 as the
received stereo source (AES Ch1 and Ch 2 for Left and Right drop-down
list selections in the Up Mixer Selection tool).
Using the setup shown in the example, when upmix is active the AES
channel 1/2 stereo pair is overwritten with the new stereo pair L/R on
channels 1/2. As selected in the example, the additional 5.1 channels C,
LFE, Left Surround (Ls), and Right Surround (Rs) overwrite AES Ch 3 –
Ch 6, respectively.
Table 3-2 9033 Function Submenu List — continued
AES Ch 1 –
Ch 16
>
AES Ch 1
AES Ch 2
AES Ch 3
AES Ch 4
AES Ch 5
AES Ch 6
L
R
(C)
(LFE)
(Ls)
(Rs)
L – AES Ch 1
R – AES Ch 2
C – AES Ch 3
LFE – AES Ch 4
Ls – AES Ch 5
Rs – AES Ch 6