Setting up 9033 network remote control, Setting up 9033 network remote control (p. 2-9), Installation and setup – Cobalt Digital COMPASS 9033 Input Processing Analog to Digital Video User Manual
Page 37
9033-OM (V4.0)
9033 PRODUCT MANUAL
2-9
Installation and Setup
Setting Up 9033 Network Remote Control
Setting Up 9033 Network Remote Control
Perform remote control setup in accordance with Cobalt
®
reference guide
“Remote Control User Guide” (PN 9000RCS-RM).
Note:
• If network remote control is to be used for the frame and the frame has not
yet been set up for remote control, Cobalt
®
reference guide Remote
Control User Guide (PN 9000RCS-RM) provides thorough information and
step-by-step instructions for setting up network remote control of
COMPASS™ cards using DashBoard™. (Cobalt
®
OGCP-9000 and
OGCP-9000/CC Remote Control Panel product manuals have complete
instructions for setting up remote control using a Remote Control Panel.)
Download a copy of this guide by clicking on the Support>
Documents>Reference Guides
as listed in Contact Cobalt Digital Inc. (p. 1-24).
• If installing a card in a frame already equipped for, and connected to
DashBoard™, no network setup is required for the card. The card will be dis-
covered by DashBoard™ and be ready for use.