Cobalt Digital COMPASS 9391 3G_HD_SD-SDI Timecode Burn-In Inserter - Manual (Page 22)

2
Installing a Rear Module
2-4 9391-TCB PRODUCT MANUAL 9391-TCB-OM (V1.3)
9391 Rear Modules
Table 2-1 shows and describes the full assortment of Rear Modules
specifically for use with the 9391.
Notes: • Rear Modules equipped with 3-wire Phoenix connectors are supplied with
removable screw terminal block adapters. For clarity, the adapters are omit-
ted in the drawings below. Refer to Connecting To 3-Wire Phoenix Terminal
Connectors (p. 2-5) for connector polarity orientation details.
• The Rear Modules shown here are standard production items. Other signal
combinations may be available as custom items. Consult Product Support
with requests. Also, please check our web site pages for this product; new
Rear Modules may be available that are not listed here.
Table 2-1 9391 Rear Modules
9391 Rear Module Description
RM20-9391-D Rear Module Provides the following connections:
• 3G/HD/SD-SDI video input BNC ( SDI IN )
• RS-485 LTC input LTC IN/OUT
• Four 3G/HD/SD-SDI video output BNCs
( SDI OUT 1 thru SDI OUT 4 ). Output routing
assignments per card SDI Output Map GUI routing.
Note: Some rear module labels may label
SDI OUT 1 thru SDI OUT 4 as SDI OUT A
thru SDI OUT D, respectively.
RM20-9391-E Rear Module