Accessing the 9391 card via remote control, Accessing the 9391 card using dashboard, Accessing the 9391 card via remote control -5 – Cobalt Digital COMPASS 9391 3G_HD_SD-SDI Timecode Burn-In Inserter User Manual
Page 29: Accessing the 9391 card using dashboard™ -5, Operating instructions
![background image](/manuals/280012/29/background.png)
9391-TCB-OM (V1.3)
9391-TCB PRODUCT MANUAL
3-5
Operating Instructions
Accessing the 9391 Card via Remote Control
Accessing the 9391 Card via Remote Control
Access the 9391 card using DashBoard™ as described below.
Accessing the 9391 Card Using DashBoard™
1.
On the computer connected to the frame LAN, open DashBoard™.
2.
As shown below (in the left side Basic View Tree) locate the Network
Controller Card associated with the frame containing the 9391 card to be
accessed (in this example, “MFC-8320-N SN: 00108053”).
3.
As shown below, expand the tree to access the cards within the frame.
Click on the card to be accessed (in this example, “Slot 6: 9391”).
.
As shown on the next page, when the card is accessed in DashBoard™
its function submenu screen showing tabs for each function is displayed.
(The particular submenu screen displayed is the previously displayed
screen from the last time the card was accessed by DashBoard™).
DB_ACCESS1.PNG
DB_ACCESS2A.PNG