Cobalt Digital COMPASS 9391 3G_HD_SD-SDI Timecode Burn-In Inserter - Manual (Page 31)

9391-TCB-OM (V1.3) 9391-TCB PRODUCT MANUAL 3-7
Operating Instructions
Checking Card Information
Checking Card Information
The operating status and software version the 9391 card can be checked using
DashBoard™. Figure 3-4 shows and describes the 9391 card information
screen using DashBoard™.
Note: Proper operating status in DashBoard™ is denoted by green icons for the
status indicators shown in Figure 3-4. Yellow or red icons respectively
indicate an alert or failure condition. Refer to Troubleshooting (p. 3-18) for
corrective action.
Figure 3-4 9391 Card Info Utility
The Tree View shows the cards seen by DashBoard™.
In this example, Network Controller Card MFC-8320-N
(serial number ...8053) is hosting a 9391 card in slot 18.
Status Displays
Clicking the Status sub-tab shows the status the signal being
received by the 9391, and other card conditions. Green
Settings icon shows that any changes made on DashBoard™
are sucessfully saved on the card’s memory.
Clicking the Product sub-tab shows product information such
as card model, options installed, and firmware versions. Use
this information when communicating to Cobalt
®
regarding the
card.
9391_CARD_INFO.PNG