Cobalt Digital COMPASS 9391 3G_HD_SD-SDI Timecode Burn-In Inserter - Manual (Page 24)

2
Setting Up 9391 Network Remote Control
2-6 9391-TCB PRODUCT MANUAL 9391-TCB-OM (V1.3)
Setting Up 9391 Network Remote Control
Perform remote control setup in accordance with Cobalt ® reference guide
“Remote Control User Guide” (PN 9000RCS-RM).
Note: • If network remote control is to be used for the frame and the frame has not
yet been set up for remote control, Cobalt ® reference guide Remote
Control User Guide (PN 9000RCS-RM) provides thorough information and
step-by-step instructions for setting up network remote control of Cobalt
®
cards using DashBoard™. (Cobalt ® OGCP-9000 and OGCP-9000/CC
Remote Control Panel product manuals have complete instructions for
setting up remote control using a Remote Control Panel.)
Download a copy of this guide by clicking on the Support>Reference Doc-
uments link at www.cobaltdigital.com and then select DashBoard Remote
Control Setup Guide as a download, or contact Cobalt
® as listed in Contact
Cobalt Digital Inc. (p. 1-14).
• If installing a card in a frame already equipped for, and connected to
DashBoard™, no network setup is required for the card. The card will be dis-
covered by DashBoard™ and be ready for use.