OMAX 120X Series JetMachining Center - Manual (Page 2)

120X SERIES
MACHINE DIMENSIONS
Footprint (with controller)
21’8” x 17’3” to 48’9” x 19’2”
(6,604 mm x 5,258 mm to
14,859 mm x 5,842 mm)
Weight (tank empty)
12,000 lbs to 30,000 lbs
(5,443 kg to 13,607 kg)
Height (with scissor plumbing) 14’0” (4,267 mm)
Operating Weight
48,630 lbs to 117,160 lbs
(22,060 kg to 53,142 kg)
WORK ENVELOPE
X-Y Cutting Travel*
13’4” x 10’0” to 40’0” x 10’0”
(4,064 mm x 3,048 mm to
12,192 mm x 3,048 mm)
Z-Axis Travel* 8” (203mm)
Table Size
14’11” x 11’5” to 41’10” x 11’5”
(4,547 mm x 3,480 mm to
12,751 mm x 3,480 mm)
DRIVE DESCRIPTION
• Closed loop, digital drives
• Brushless servo motors
• Intelli-TRAX drive technology with
linear encoders in X-Axis
• Precise Motorized Z-Axis
OMAX CORPORATION
21409 72nd Avenue South
Kent, WA 98032
TEL 1-253-872-2300 / 1-800-838-0343
FAX 1-253-872-6190
WWW.OMAX.COM
Made in the USA
The OMAX Technology Guarantee
entitles you, as the original owner, to
free OMAX software upgrades for the
life of the machine.
Specifications subject to change without notice.
600041B January 2014
STANDARD MODEL SPECIFICATIONS
Material Support Slats 4" x 1/8" Galvanized Steel
Maximum Supported Material Load 400 lbs/sq ft (1,950 kg/sq meter)
Electrical Requirements
3-Phase, 380-480 VAC ±10%,
50-60 Hz
Noise Level
Below 80 dBA at one meter for
submerged cutting
Speed
180 in/min to 350 in/min
(4,572 mm/min to 8,890 mm/min)
Accuracy of Motion at 70˚ F
Ballbar Circularity
(Over 12")
±0.005”
(±0.127mm)
Repeatability
±0.002"
(±0.051 mm)
OPTIONAL ACCESSORIES
• DualPUMP Package (redundant dual
EnduroMAX option up to 100 hp)
• Tilt-A-Jet Cutting Head
• Variable Speed SRS (VS-SRS)
• Collision Sensing Terrain Follower
(with Tilt-A-Jet only)
• Z-Axis Drill
• Precision Optical Locator (POL)
• Water-only MAXJET 5 for cutting soft
materials
• OMAX Mini MAXJET 5i Nozzle
Assembly
• Manual Tilt Z
• DualBRIDGE second bridge option
• Second MAXJET 5i with Motorized
Z-Axis and all necessary hard
plumbing (requires second Y-Axis
carriage)
• Laminar Filter
• Waterjet Brick Kit
• Rotary Axis
• Air and Water Conditioning Kit
• A-Jet
• Terrain Follower/A-Jet
• Material Holding Kit
• Laser Feature Finder
*Optional accessories may reduce travel. Photos may show optional
accessories. For a complete list of accessories, contact an OMAX sales
representative. Pumps are built to meet UL and CE specifications. Contact
OMAX for detailed utility requirements.
ABOUT OMAX
OMAX is the global total solutions provider in advanced abrasive waterjet
systems. Our intuitive Intelli-MAX Software Suite simplifies programming and
reduces setup times, increasing your productivity. OMAX engineers continue
to innovate technology for waterjet machining, from proven 4th generation
pump designs to cutting edge drive systems with micron-level accuracy. With
the largest abrasive waterjet support network in the world, OMAX continues to
shape the future of waterjets.
To see how an OMAX JetMachining Center can save you time and money, call
or visit our website and request a free part analysis today.
120X/S
X-Y Cutting Travel:
13’4” x 10’0”
120X-3
X-Y Cutting Travel:
40’0” x 10’0”
120X-2
X-Y Cutting Travel:
33’4” x 10’0”
120X-1
X-Y Cutting Travel:
26’8” x 10’0”
120X
X-Y Cutting Travel:
20’0” x 10’0”