OMAX 2652 JetMachining Center - Manual (Page 2)

2652
OMAX CORPORATION
21409 72nd Avenue South
Kent, WA 98032
TEL 1-253-872-2300 / 1-800-838-0343
FAX 1-253-872-6190
WWW.OMAX.COM
Made in the USA
The OMAX Technology Guarantee
entitles you, as the original owner, to
free OMAX software upgrades for the
life of the machine.
Specifications subject to change without notice.
600036B January 2014
MACHINE DIMENSIONS
Footprint (with controller)
11’ 7” x 5’ 7”
(3,531 mm x 1,702 mm)
Weight (tank empty) 3,320 lb (1,505 kg)
Height (with scissor plumbing) 7’ 11” (2,413 mm)
Operating Weight 9,150 lb (4,150 kg)
WORK ENVELOPE
X-Y Cutting Travel* 4’ 4” x 2’ 2” (1,321 mm x 660 mm)
Z-Axis Travel (with Motorized Z Axis)* 8” (203 mm)
Table Size 5’ 9” x 2’ 6” (1,753 mm x 762 mm)
DRIVE DESCRIPTION
• Closed loop, digital drives
• Brushless servo motors
• Pre-loaded ball screws, recirculating
ball bearings
• Linear bearings with
hardened,precision ground ways
• Cantilever Y-axis on bridge
X-axis
STANDARD MODEL SPECIFICATIONS
Material Support Slats 4" x 1/8" Galvanized Steel
Maximum Supported Material Load 400 lbs/sq ft (1,950 kg/sq meter)
Electrical Requirements
3-Phase, 380-480 VAC ±10%,
50-60 Hz
Noise Level
Below 80 dBA at one meter for
submerged cutting
Speed 180 in/min (4,572 mm/min)
Accuracy of Motion at 70˚ F
Ballbar Circularity
(Over 12”)
±0.003”
(±0.076 mm)
Repeatability
±0.0013”
(±0.033 mm)
OPTIONAL ACCESSORIES
• Tilt-A-Jet Cutting Head for taper
compensation
• Variable Speed SRS (VS-SRS)
• Collision Sensing Terrain Follower
• OMAX Drill Head
• Precision Optical Locator (POL)
• Rotary Axis
• Water-only MAXJET 5 for cutting soft
materials
• OMAX Mini MAXJET 5i Nozzle
Assembly
• Manual Tilt Z
• Laminar Filter
• Waterjet Brick Kit
• Catcher Tank Armor Plating
• Stainless Steel Tank Cover Kit
• Material Holding Kit
• Laser Feature Finder
*Optional accessories may reduce travel. Photos may show optional
accessories. For a complete list of accessories, contact an OMAX sales
representative. Pumps are built to meet UL and CE specifications. Contact
OMAX for detailed utility requirements.
ABOUT OMAX
OMAX is the global total solutions provider in advanced abrasive waterjet
systems. Our intuitive Intelli-MAX Software Suite simplifies programming and
reduces setup times, increasing your productivity. OMAX engineers continue
to innovate technology for waterjet machining, from proven 4th generation
pump designs to cutting edge drive systems with micron-level accuracy. With
the largest abrasive waterjet support network in the world, OMAX continues to
shape the future of waterjets.
To see how an OMAX JetMachining Center can save you time and money, call
or visit our website and request a free part analysis today.